FORD/LINCOLN BACK-UP CAMERA INTERFACE

Here's the solution for adding an aftermarket or factory style rear camera and/or front camera into Ford/Lincoln vehicles equipped with the OEM 4" or 8" media screen.
No dealership programming is required.

IMG_4436.jpg
IMG_4460_edited.jpg

FORD 4" INTERFACE

A sollution that will enable the backup camera feature on your vehicle's 4" screen. It will show the added vehicle matched backup camera when the vehicle is placed in reverse - just like it would from the factory!

FORD 8" INTERFACE

A sollution to add a backup camera to any Ford or Lincoln vehicle with SYNC 2 (MyFord / MyLincoln Touch) or SYNC 3.
We carry many factory style cameras to complete perfect match for any vehicle.

Screen Shot 2019-12-06 at 12.41_edited.j

FRONT CAMERA INTERFACE

Not only can we add a rear camera to a factory screen, we can add a front camera that can be toggled on when parking and auto comes on momentaraly when vehicle is shifted from part to drive. It will stay on for 10 seconds andturns off when vehicle reaches 12 mph.

 

FMVSS 111
FEDERAL MOTOR VEHICLE SAFETY STANDARD REAR VISION REGULATION TAKES EFFECT

New Back up Camera Compliance Law


The new rear visibility portion of Federal Motor Vehicle Safety Standard FMVSS 111 rear visibility field of view regulation - applicable to vehicles with a 10,000-lb. GVW or less - will phase in for altered vehicles starting May 1, 2017. Full rear visibility conformance is required by May 1, 2018.
FMVSS 111 rear visibility has traditionally been the standard for mirrors and now includes rear camera systems. The change to include rear vision systems in the Standard comes from the Cameron Gulbransen Kids Transportation Safety Act of 2007, in which NHTSA was directed to undertake a rulemaking process to expand the required driver field of view in order to reduce backover accidents. This extended area is a 10-ft. by 20-ft. space directly behind a vehicle which traditional mirrors do not enable a driver to fully view. The test used to verify these requirements includes a series of seven specifically sized cylindrical objects with either a horizontal band or vertical stripe applied. They are located in designated positions along the perimeter of this area.
There are a series of performance requirements for the rear vision systems in this new portion of FMVSS 111. Full compliance is required for vehicles with a GVWR of 10,000 lbs. or less, manufactured on or after May 1, 2018. However, the phase-in for the Standard calls for the field of view criteria to be met (where it applies to altered vehicles) beginning May 1, 2017. This means a vehicle that is completed on or after this date and equipped with a rear vision system already meeting field of view requirements must continue to do so after it is altered. For example, when performing a pickup box removal on a truck meeting the field of view requirements with the OEM camera system, the camera will need to be reinstalled (or an equivalent, compatible camera installed) on the new body and in a position which continues to satisfy the field of view requirements.  A conservative assumption is vehicles on which you are removing and reinstalling (or replacing) a rearview camera on or after May 1, 2017, will need to be evaluated for field of view.

 

916-899-0929

  • Facebook

©2019 by The Sound Shop llc. Proudly created with Wix.com